PO Box 93

Paw Paw, MI 49079

POLICIES

PO Box 93

Paw Paw, MI 49079

POLICIES

©2019 by Paw Paw Everlast Label Company - All Rights Reserved

PLANT LABEL ASSEMBLY

Some of our plant labels/garden markers require light assembly by the customer. Please see the directions below or click on these letters (EFGM) for specific instructions.

E - Rose Style Label  (see assembly by clicking here)

  1.  Slide the wire through the two sets of holes in the plate

  2.  Slide the plate past the tilt in the wire.

  3.  Lightly press down in the center of the nameplate with your thumb to secure it in place.  

F - Tall Display Label (see assembly by clicking here)

  1.  Slide the wire through the two sets of holes in the plate.

  2.  Slide the plate past the tilt in the wire.

  3.  Lightly press down in the center of the nameplate with your thumb to secure it in place.

M - Miniature Label  (see assembly by clicking here)

  1.  Slide the wire through the two sets of holes in the plate.

  2.  Slide the plate past the tilt in the wire.

  3.  Lightly press down in the center of the nameplate with your thumb to secure it in place.


G - Tall Single Staff Label  (see assembly by clicking here)

  1.  Slide the wire through the hole in the plate.

  2.  Press the top flange of the plate over the wire.

  3.  To secure more firmly, epoxy may be applied at the top of the wire, underneath the lip of the plate.

E, F, M ASSEMBLY

G ASSEMBLY